Mower Spindle Replacement - Toro TITAN Max Service Manual

Deck Drive Belt Installation (continued)

Mower Spindle Replacement

Mower Spindle Removal
Mower Deck: Service and Repairs
g344398
7. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
8. Verify proper function of the unit.
1. Remove the mower deck.
2. Remove the 4 (0.250-20 x 0.500 inch) screws securing the LH belt cover to
the mower deck. Remove the LH belt cover from the mower deck. Repeat on
the RH side of the machine.
3. Remove the deck drive belt from the mower deck.
4. Raise and support the mower deck.
5. From the underside of the mower deck, remove the blade screw and washer
securing each mower blade to the mower deck.
g344424
6. Lower the mower deck to the ground to access the topside of the mower deck.
Figure 84
Mower Deck Removal (page 6–5)
Figure 85
Page 6–14 TITAN® Max Service Manual
3442-428 Rev A