Table of Contents
Advertisement
User's Manual
9
Configuring VoIP Parameters
The VoIP parameters are mainly configured in the 'Voice over IP' screen. This screen is
accessed by clicking the Voice over IP menu in the side menu bar. The 'Voice over IP'
screen provides tabs for configuring the following:
Signaling protocol (i.e., Session Initiation Protocol / SIP) – see Section
Dialing – see Section
Media streaming – see Section
Voice and fax – see Section
Supplementary services – see Section
Line settings – see Section
Line extensions – see Section
Speed dials – see Section
Telephone interfaces – see Section
Bluetooth – see Section
In addition to the above, you can select the region in which your device is located so that
your analog telephone complies with the line standards (e.g., line impedance) of the area.
For more information, see Section
Notes:
Version 4.4.0
9.2
on page
9.4
9.6
9.8
9.10
on
9.10.5
•
By default, the 'Voice over IP' screens initially display only basic
parameters. To view all the parameters, click the Advanced button in the
required screen.
•
Once you have configured the VoIP parameters, you can start using your
analog telephones, as described in Chapter
using your DECT handset(s), see Part II.
96
9.3
on page
102
on page
104
9.5
on page
108
on page
110
9.7
on page
119
on page
121
9.9
on page
123
124
on page 129.
89
9. Configuring VoIP Parameters
9.1
on page
9.10.6
on page 130. For
MP26x/MP27x
89
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
