AudioCodes MP-26 series User Manual page 239

User's Manual
TR-069/TR-104
Parameter
MaxMTUSize
Name
NATEnabled
PortMappingNumberOf
Entries
PossibleConnectionTy
pes
RouteProtocolRx
RSIPAvailable
ShapingRate
SubnetMask
SpecVersion
Uptime
Version 4.4.0
Configuration File
Parameter
mt_cwmp_param_wan_con
n_ip_max_mtu_size_get/se
t( i)
mt_cwmp_param_wan_con
n_xxx_name_get/set(i)
mt_cwmp_param_wan_con
n_xxx_nat_enabled_get/set
(i )
-
-
mt_cwmp_param_wan_con
n_xxx_route_protocol_rx_
get/set
mt_cwmp_param_wan_con
n_xxx_rsip_available_get(i)
-
lan_host_config_managem
ent_get/set
rg_conf dhcps/ netmask
""
-
13. Remote Device Management
The maximum allowed size of an Ethernet
frame from LAN-side devices.
User-readable name of this connection.
Indicates if NAT is enabled for this
connection.
Total number of port mapping entries.
A comma-separated list indicating the types
of connections possible for this connection
instance. Each element of the list is an
enumeration of:

"Unconfigured"

"IP_Routed"

"IP_Bridged"
Defines the Rx protocol to be used:

"Off"

"RIPv1" (Optional)

"RIPv2" (Optional)

"OSPF" (Optional)
Indicates if Realm-specific IP (RSIP) is
available as a feature on the device.
Rate to shape this connection's egress traffic
to.
If less than or equal to 100, in percentages of
the rate of the highest rate-constrained layer
over which the packet travels on egress. The
rate is limited over the window period
specified by ShapeWindow.
If greater than 100, in bits per second.
A value of -1 indicates no shaping.
Subnet mask of the WAN interface. This
parameter is configurable only if the
AddressingType is Static.
Currently, 1.0 is the only available version.
The time in seconds that this connection has
been up.
239
Description
MP26x/MP27x