User's Manual
3.1.1.2.1 General LEDs Description
The general description of the device front-panel LEDs are described in the table below.
For a description of DECT LEDs, see Section
3.1.1.2.2 LEDs for Automatic Dialer Feature
The table below describes the front-panel LEDs behavior when the Automatic Dialer
feature is used (described in detail in Section 8.1.3).
Table 3-3: Front-Panel LED Descriptions for Automatic Dialer Feature
Before WAN physical link detection
During automatic dialer operation
Automatic dialer success
Automatic dialer failure
* The Phone LED lights green only after the device connects to the Internet, downloads its
configuration file, and then registers to the VoIP service.
Version 4.4.0
Stage
24.3.3
on page 404.
Status
Broadband
Green
Blinking Red
Green
Blinking Green
Green
Green
33
3. Hardware Description
LED
Phone
Off
Off
Green*
Green
Red
Off
MP26x/MP27x