Remote Device Management; Overview; Remote Configuration - AudioCodes MP-26 series User Manual

User's Manual
13

Remote Device Management

This chapter provides an overview of the device's remote configuration and management
support. In addition, this chapter describes how to enable and secure remote management,
as well configure the device through TR069.
13.1

Overview

The device is designed to be mass-deployed. One of the keys to guarantee end-user
satisfaction and true toll-quality service in mass field deployment is comprehensive remote
configuration and management capabilities:

Automatic and remote configuration updates

Automatic and remote firmware updates

Remote diagnosis of problems reported by the user

Remote collection of statistical information regarding the quality of the service

Remote notifications of problems in the service

13.1.1 Remote Configuration

By default, the device is provided with factory default settings, which are common to all
gateway devices (except for the MAC address). The factory settings allow the user to
connect to the device's Web interface through the LAN.
By default, the WAN interface is configured for DHCP (i.e., automatically obtains its IP
address from a DHCP server). The default configuration should not include any VoIP
service provider settings (such as a SIP proxy).
In some cases, AudioCodes can ship devices that are pre-configured with some customer-
specific parameters. This set of parameters is usually defined as the new "factory settings"
for the specific customer.
The device's factory default settings and the current configuration running on the device
are stored on the device's non-volatile flash memory. The current configuration can be
remotely updated using several configuration interfaces:

HTTP-based Web server

TR-069

Configuration file upload/download
Version 4.4.0
13. Remote Device Management
225 MP26x/MP27x