Wan Dsl Connections; Figure 12-3: Wan Atm Over Dsl Properties - AudioCodes MP-26 series User Manual

User's Manual

12.1.1 WAN DSL Connections

You can configure the following WAN DSL connection types:

Determine Protocol Type Automatically (PVC scan) – see Section
157

Point-to-Point Protocol over Ethernet (PPPoE) – see Section

Point-to-Point Protocol over ATM (PPPoA) – see Section

Routed Ethernet Connection over ATM (Routed ETHoA) – see Section
page 161

LAN-WAN Bridged Ethernet Connection over ATM (Bridged ETHoA) – see Section
12.1.1.4

Routed IP over ATM (IPoA) – see Section
If you have established a WAN ATM over DSL connection, you can view the properties of
this connection as described below.

To view the WAN ATM over DSL properties:

In the 'Network Connections' screen, click the Edit
ATM over DSL network connection; the 'WAN ATM over DSL Properties' screen
appears:
Version 4.4.0
on page 161

Figure 12-3: WAN ATM over DSL Properties

12.1.1.5 on page
icon corresponding to the WAN
155
12. Network Connections
12.1.1.1 on page
12.1.1.2 on page 158
12.1.1.3 on page 160
12.1.1.4
163
MP26x/MP27x
on