Viewing The Device Base Unit Status Using Dect Led; Table 24-5: Dect Led Description - AudioCodes MP-26 series User Manual

24.3.3 Viewing the Device Base Unit Status using DECT LED

The DECT LED is located on the front panel of the device and indicates the operating
status of the cordless phone, as described in the table below:
Color
Green
Green Flashing
Green Flash Fast
Red
Flashing
Flashes (3 times) Attempting to register more than the allowed number of handsets
Amber Flashing
-
User's Manual

Table 24-5: DECT LED Description

State
On The base unit is ready to make or receive calls with the handset.
The base is available for handset registration. To register a
handset, see Section
The base is being upgraded.
Note: Do not power off the unit during the upgrade process.
On The base unit is on but no handset is registered to it.
There is a malfunction in DECT cordless phone.
to the base unit (i.e., more than five).
The handset is being paged. To page (locate) the handset, see
Section 25.12
Off The phone is switched off. To switch the phone on or off, see
Section 24.2.3
MP-26x/MP-27x Multimedia Home Gateway
Description
24.4 on page
on page 416.
on page 395.
404
405
Document #: LTRT-23510