Upgrading The Device From A Computer On The Network - AudioCodes MP-26 series User Manual

19.6.1 Upgrading the Device from a Computer on the Network

The procedure below describes how to upgrade the device from a software image file
located on a local computer or network.
Note: You can only use files with an *.rmt extension when performing the firmware
upgrade procedure.

To upgrade the device software image using a locally available .rmt file:
1. In the 'Advanced' screen, click the Firmware Upgrade
Firmware Upgrade' screen appears.
Figure 19-14: Firmware Upgrade Screen (e.g., MP-264)
User's Manual
MP-26x/MP-27x Multimedia Home Gateway
362
icon; the 'MP264
Document #: LTRT-23510