Wireless Tab; Switch Tab - AudioCodes MP-26 series User Manual


Name: Select the network device.

Destination: destination host, subnet address, network address, or default route. The
destination for a default route is 0.0.0.0.

Netmask: This is used in conjunction with the destination to determine when a route is
used.

Gateway: Enter the device's IP address.

Metric: A measurement of the preference of a route. Typically, the lowest metric is the
most preferred route. If multiple routes exist to a given destination network, the route
with the lowest metric is used.

12.3.4 Wireless Tab

For a description of the Wireless tab, see Section
Note: This tab is applicable only to LAN Wireless connections.

12.3.5 Switch Tab

For a description of the Switch tab, see Section
Note: This tab is applicable only to LAN Hardware Ethernet Switch connections.
User's Manual
Figure 12-80: Route Settings Screen
208
MP-26x/MP-27x Multimedia Home Gateway
12.2.1.3 on page 180.
12.2.2.3 on page 200.
Document #: LTRT-23510