Configuring The Dhcp Server - AudioCodes MP-26 series User Manual


To view services currently provided by the DHCP server:

In the 'Advanced' screen, click the IP Address Distribution
Distribution' screen appears.
Note:

15.1.1 Configuring the DHCP Server

The procedure below describes how to edit a service provided by the DHCP server.

To edit the DHCP server settings for a device:
1. In the 'IP Address Distribution' screen, click the Edit
entry that you want to edit; the DHCP Server settings for this device are displayed.
2. From the 'IP Address Distribution' drop-down list, select whether to disable the device
DHCP server, or enable DHCP (the device serves as a DHCP server or DHCP relay).
User's Manual
Figure 15-1: DHCP Server Summary
If the 'Service' column displays "Disabled", then DHCP services are not being
provided to hosts connected to the network through the device interface. This
means that the device does not assign IP addresses to these computers,
which is useful if you wish to work with static IP addresses only.
Figure 15-2: DHCP Settings Screen
MP-26x/MP-27x Multimedia Home Gateway
282
icon; the 'IP Address
icon corresponding to the
Document #: LTRT-23510