Table 13-10: Internetgatewaydevice.services.voiceservice.i.capabilities.codecs; Table 13-11: Internetgatewaydevice.services.voiceservice.i.voiceprofile - AudioCodes MP-26 series User Manual

Table 13-10: InternetGatewayDevice.Services.VoiceService.i.Capabilities.Codecs

TR-069/TR-104
Parameter
Codec
EntryID
PacketizationPeriod voip/codec/i/ptime

Table 13-11: InternetGatewayDevice.Services.VoiceService.i.VoiceProfile

TR-069/TR-104
Parameter
DTMFMethod
Enable
Name
User's Manual
Configuration File
Parameter
voip/codec/i/name
voip/codec/i/
Configuration File
Parameter
voip/out_of_band_dtmf
-
-
MP-26x/MP-27x Multimedia Home Gateway
Description
Identifier of the type of codec.
Unique identifier for each entry in the table.
Comma-separated list of supported
packetization periods (in milliseconds), or
continuous ranges of packetization periods.
Ranges are indicated as a hyphen-
separated pair of unsigned integers.
For example:

"20" indicates a single discrete value.

"10, 20, 30" indicates a set of discrete
values.

"5-40" indicates a continuous inclusive
range.

"5-10, 20, 30" indicates a continuous
range in addition to a set of discrete
values.
A range must only be indicated if all values
within the range are supported.
Note: Currently, only a single ptime per
codec is supported.
Description
Method by which DTMF digits must be
passed:

"InBand"

"RFC2833"

"SIPInfo
Enables or disables all lines in this profile, or
places it into a quiescent state:

"Disabled"

"Quiescent"

"Enabled"
On creation, a profile must be in the
Disabled state.
In the Quiescent state, in-progress sessions
remain intact, but no new sessions are
allowed. Support for the Quiescent state in
the device is optional. If this parameter is set
to "Quiescent" in the device that does not
support the Quiescent state, it must treat it
the same as the Disabled state.
String to easily identify the profile instance.
Note: Currently, this is not supported.
244 Document #: LTRT-23510