Lan Connection; Wireless Lan - AudioCodes MP-26 series User Manual

User's Manual
12.2

LAN Connection

This section describes how to configure the following the device LAN connections:


Wireless LAN


LAN hardware Ethernet switch
12.2.1 Wireless LAN
This section describes how to configure the device wireless network. This network is
configured in the 'Network Connections' screen, which provides a connection wizard that
guides you through the network configuration stages.
Notes:

To configure the Wireless LAN:
1. From the menu bar, click the Network Connections menu; the 'Network Connections'
screen appears.
Figure 12-40: Network Connections Screen Displaying LAN Wireless Interface
The 'Status' column corresponding to the wireless LAN network ('LAN Wireless
802.11n Access Point') displays whether the wireless connection is enabled or
disabled.
2. Click the Edit
network name; the 'LAN Wireless 802.11n Access Point Properties' screen appears,
displaying the contents of the General tab.
Version 4.4.0
•
To establish a wireless network connection between a PC and the device,
you must also configure the PC for wireless connectivity (see Section
on page 71).
•
You can also configure and enable the wireless LAN in the 'Quick Setup'
screen.
icon corresponding to the 'LAN Wireless 802.11n Access Point'
177
12. Network Connections
7.2
MP26x/MP27x