Table of Contents
Advertisement
4.2.3
Configuring 3G USB Modem
The procedure below describes how to configure a WAN connection using a 3G cellular
modem. The 3G cellular modem is connected to the device's physical port.
To configure a WAN connection using a 3G cellular modem:
1.
In the Quick Setup page under the WAN 3G USB Modem group, select the required
connection type from the 'Connection Type' drop-down list.
2.
Enter your login user name and password.
3.
Click OK.
4.
In the 'Advanced' screen, click the 3G
5.
In the 'Access Point PIN Code' field, enter the modem's personal identification number
(PIN), obtained from your Internet Service Provider.
6.
In the Access Point PUK Code field, enter the SIM's PIN
your Internet Service Provider.
7.
Click OK.
User's Manual
Figure 4-5: WAN 3G USB Modem
Figure 4-6: Advanced 3G Settings
46
MP-26x/MP-27x Multimedia Home Gateway
icon; the '3G' screen appears.
Unlock Key obtained from
Document #: LTRT-23510
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
