Table of Contents
Advertisement
12.1.1.3 PPPoA
PPPoA is a standard for incorporating the popular PPP protocol into a DSL connection that
uses ATM as its networking protocol. From the PC, IP packets travel over an Ethernet
connection to the device, which encapsulates the PPP protocol to the IP packets and
transports them to the service provider's DSLAM over ATM.
To create a PPPoA connection:
1.
In the 'Network Connections' screen, click the New
screen appears.
2.
Select the Internet DSL Connection option, and then click Next; the 'Internet DSL
Connection' screen appears.
3.
Select the Point-to-Point Protocol over ATM (PPPoA) option, and then click Next;
the 'DSL PVC Parameters Configuration' screen appears.
Figure 12-10: DSL PVC Parameters Configuration Screen
4.
Select one of the following options:
•
Automatic PVC Scan: If you want to obtain the DSL PVC parameters
automatically
•
Manual PVC Settings: If you do not want to obtain the DSL PVC parameters
automatically
5.
Click Next; the 'Point-to-Point Protocol over ATM (PPPoA)' screen appears.
Figure 12-11: Point-to-Point Protocol over ATM (PPPoA) Screen
6.
Enter your PPPoA login username and password (provided by your ITSP).
User's Manual
MP-26x/MP-27x Multimedia Home Gateway
160
icon; the 'Connection Wizard'
Document #: LTRT-23510
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
