Ip Address Distribution; Table 12-7: Ip Address Distribution Parameters; Table 12-8: Dhcp Relay - AudioCodes MP-26 series User Manual

User's Manual

12.4.1.1 IP Address Distribution

The 'IP Address Distribution' section allows you to configure the device's Dynamic Host
Configuration Protocol (DHCP) server parameters. The DHCP automatically assigns IP
addresses to network PCs. If you enable this feature, make sure that you also configure
your network PCs as DHCP clients. For a comprehensive description of this feature, see
Section 10.28.
Select one of the following options from the 'IP Address Distribution' drop-down list:
Parameter
DHCP Server
End IP Address
Subnet Mask
Lease Time In
Minutes
Provide Host Name
If Not Specified by
Client
Parameter
DHCP Relay
Version 4.4.0

Table 12-7: IP Address Distribution Parameters

Start IP Address The first IP address that may be assigned to a LAN host.
Since the device's default IP address is 192.168.2.1, this address must be
192.168.2.2 or greater.
The last IP address in the range that can be used to automatically assign IP
addresses to LAN hosts.
A mask used to determine to what subnet an IP address belongs. An example
of a subnet mask value is 255.255.0.0.
Each device is assigned an IP address by the DHCP server for a this amount
of time, when it connects to the network. When the lease expires the server
determines if the computer has disconnected from the network. If it has, the
server may reassign this IP address to a newly-connected computer. This
feature ensures that IP addresses that are not in use become available for
other computers on the network.
If the DHCP client does not have a host name, the device automatically
assigns one for him.
Figure 12-89: IP Address Distribution - DHCP Server

Table 12-8: DHCP Relay

Your device can act as a DHCP relay in case you would like to dynamically
assign IP addresses from a DHCP server other than your Telephone Adapter's
DHCP server. Note that when selecting this option you must also change the
device's WAN to work in routing mode. For detailed information, see Section
10.28.2.
Description
Description
217
12. Network Connections
MP26x/MP27x