8.1.1.2
PPPoA
The procedure below describes how to connect to the Internet by PPPoA.
To configure PPPoA connection:
1.
Under the WAN ATM over DSL group, from the 'Connection Type' drop-down list,
select 'Point-to-Point Protocol over ATM (PPPoA)'.
2.
Configure the following (provided by your ITSP):
•
Login user name
•
Login password
3.
Click OK.
8.1.1.3
Routed ETHoA
The procedure below describes how to connect to the Internet by ETHoA.
To configure routed ETHoA connection:
1.
Under the WAN ATM over DSL group, from the 'Connection Type' drop-down list,
select 'Routed Ethernet Connection over ATM (Routed ETHoA)'.
Figure 8-4: Routed ETHoA WAN DSL Internet Connection
2.
Click OK.
8.1.1.4
Bridged ETHoA
The procedure below describes how to connect to the Internet by bridged ETHoA.
To configure bridged ETHoA connection:
1.
Under the WAN ATM over DSL group, from the 'Connection Type' drop-down list,
select 'LAN-WAN Bridged Ethernet Connection over ATM (Bridged ETHoA)'.
Figure 8-5: Bridged ETHoA WAN DSL Internet Connection
2.
Click OK.
User's Manual
Figure 8-3: PPPoA WAN DSL Internet Connection
MP-26x/MP-27x Multimedia Home Gateway
76
Document #: LTRT-23510