User's Manual
12.2.1.3.3 Enabling WPS
The procedure below describes how to enable WPS. WPS is a method for simplifying the
security setup and management of wireless networks. This feature is disabled by default.
By enabling it, you can control the setup of your wireless security, which is defined under
the Security group (see Section
To enable WPS:
1.
From the menu bar, click the Network Connections menu; the 'Network Connections'
screen appears.
2.
Click the Edit
Virtual AP Properties' page; the LAN Wireless 802.11n Access Point Properties
appears.
Version 4.4.0
12.2.1.3.4
Figure 12-48: Network Connections
icon corresponding to the 'LAN Wireless 802.11n Access Point -
183
on page 189).
12. Network Connections
page
MP26x/MP27x