Configuring Voice And Fax; Figure 9-5: Voice And Fax Tab Screen - AudioCodes MP-26 series User Manual

9.4

Configuring Voice and Fax

The procedure below describes how to configure the voice and fax parameters.

To configure voice and fax parameters:
1. In the 'Voice Over IP' screen, click the Voice and Fax tab and then click Advanced;
the following screen appears.
2. Select the 'Enable Artificial Bandwidth Extension' check box to enable this setting.
User's Manual

Figure 9-5: Voice and Fax Tab Screen

104
MP-26x/MP-27x Multimedia Home Gateway
Document #: LTRT-23510