Table of Contents
Advertisement
User's Manual
A.3
Connecting the Backup Battery Pack
The procedure below describes how to connect the Backup Battery Pack.
1.
Connect the Backup Battery Pack power wire to the device power socket.
2.
Connect the Backup Battery Pack Signal Control wire to the device RS-9 socket.
3.
Connect one end of the device AC power cord to the power socket on the Backup
Battery Pack and the other end to the grounded power outlet.
4.
Turn on the Backup Battery Pack switch.
5.
When the batteries are fully charged, the LED on the Backup Battery Pack is
displayed green (it takes 16 hours to fully charge the Backup Battery Pack upon initial
use).
Version 4.4.0
Figure A-1: Backup Battery Pack
455
A. Backup Battery Pack
MP26x/MP27x
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
