Table 13-1: Main Configuration Parameter Groups - AudioCodes MP-26 series User Manual

Figure 13-1: Remote Management Interfaces (e.g., MP-264)
All configuration interfaces access the same internal configuration repository. The
configuration file represents the complete set of the device configuration parameters.
Specific configuration interfaces (e.g. TR-069) might support access only to a sub-set of
these configuration parameters.
At any time, the factory settings can be restored using the Web interface or by pressing the
Reset pin-hole button while the device is being powered up.
The table below lists the main device configuration parameter groups:
Group
VoIP
WAN Interface
Network Connections
Security
QoS
System / Advanced
User's Manual

Table 13-1: Main Configuration Parameter Groups

Parameters relating to the VoIP functionality (e.g. analog interface, SIP
signaling, voice and fax, media streaming)
The main WAN Internet connection (this group is also referred to as the
"Quick Setup").
Configuration of all network connections (LAN and WAN), including
advanced connections such as VLANs.
Parameters relating to the internal firewall.
Configuration of Quality of Service parameters such as priorities and traffic
shaping.
Configuration of system parameters such as Remote Update and Remote
Access and advanced parameters such as Dynamic DNS, UPnP.
MP-26x/MP-27x Multimedia Home Gateway
Description
226 Document #: LTRT-23510