Upgrading The Device And The Base Unit - AudioCodes MP-26 series User Manual

User's Manual
24.4

Upgrading the Device and the Base Unit

If the software version currently running on the device is older than Version 3.3.0 build 17,
you need to upgrade the device as well as your device base unit.
Note:
You can view the current software version running on the device by using the Web
interface, as follows:
1. Access the device Web interface.
2. From the menu pane, select the Advanced menu, and then click the About MP264
icon; the 'About MP264' screen appears.

To upgrade the device and base unit software versions:
1. Upgrade the device software version using the Web interface's 'Firmware Upgrade'
screen (Advanced menu > Firmware Upgrade
Section
2. After the device re-boots, the software compares the burnt DECT firmware, with the
embedded firmware. If different, an automatic upgrade of the DECT takes place.
Note:
Version 4.4.0
If you are a registered customer, you can download the latest device software
file and base unit
http://www.audiocodes.com/downloads.
Figure 24-8: About MP264 Screen (e.g., MP-264)
19.6 on page 361.
During the upgrade process, do NOT power off the device.
software file from
icon). For more information, see
405
24. Getting Started
AudioCodes Web site
MP26x/MP27x
at
Software
Version