Automatic File Sharing - AudioCodes MP-26 series User Manual

♦
•
File Server Shares: Define file shares on your disk partitions, as described in the
following sections.

17.1.1 Automatic File Sharing

By default, all partitions are automatically shared and displayed.

To share specific directories or partitions:
1. Clear the 'Automatically Share All Partitions' check box, and then click Apply. The list
of all automatically shared partitions disappears.
2. In the 'File Server Shares' table, click New
Server Share Settings' screen appears.
3. Enter the share's name (default is "share"), path, and (optionally) comment. The
share's name is not case sensitive. Even if entered in upper-case letters, the name is
displayed in lower case after saving the setting.
User's Manual
Allow Guest Access: From the drop-down list, select a permission level,
according to which the LAN users access the share:

Read/Write: Every LAN user can read and write the shared files without
authentication.

Read Only: Every LAN user can only read the shared files.

Disabled: LAN users must authenticate themselves to access the
share. They can use the share according to their permissions defined in
the 'User Settings' screen.
Figure 17-2: File Server Share Settings Screen
MP-26x/MP-27x Multimedia Home Gateway
icon to define a new share; the 'File
302 Document #: LTRT-23510