Table of Contents
Advertisement
8.3
Setting up a Wireless LAN Network
The 'Quick Setup' screen provides basic parameters to quickly setup a wireless (or Wi-Fi)
network.
Note:
For advanced wireless network settings, see Section
To quickly setup a wireless network:
1.
Access the 'Quick Setup' screen. The Wireless group in the screen is shown below:
2.
Select the 'Enable Wireless' check box to enable the wireless network.
3.
In the 'Wireless Network (SSID)' field, enter the name of your wireless network.
4.
From the '802.11 Mode' drop-down list, select the required wireless communication
standard.
5.
From the 'Security' drop-down list, select the type of security protocol. If you selected
'Password Protected', then enter the password in the 'Password' field.
6.
Click OK.
User's Manual
Figure 8-16: Wireless Group in Quick Setup Screen
MP-26x/MP-27x Multimedia Home Gateway
88
12.2.1
on page 177.
Document #: LTRT-23510
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
