Restoring Data - AudioCodes MP-26 series User Manual

19.4.2 Restoring Data

The procedure below describes how to restore data.

To restore data:
1. In the 'Advanced' screen, click the
appears.
2. Select the Restore tab; the 'Restore' screen appears.
3. In the 'Source Archive' field, type the source to restore, for example, "A/homes".
4. From the 'Restore Option' drop-down list, select whether to restore the entire archive
or only a subdirectory. If you choose subdirectory, a second field appears in which you
must enter the name of the subdirectory relative to the source archive. For example, to
restore "A/homes/john", type "john" as the subdirectory.
5. From the 'Destination' drop-down list, select a destination for which to restore the
archive. You can choose the original location or any other directory. If you choose
another directory, a second field appears in which you must enter the name of the
directory. Note that the path of the restored directory is created under the path of the
destination directory. For example, if you specify the directory "A/restore_dir", the
result is "A/restore_dir/A/homes/john".
User's Manual
MP-26x/MP-27x Multimedia Home Gateway
Figure 19-8: Restore Screen
352
icon; the 'Backup and Restore' screen
Document #: LTRT-23510