Table of Contents
Advertisement
User's Manual
12.1.2 WAN Ethernet Connections
You can configure the following WAN Ethernet connection types:
The device connected to an external DSL modem and using PPPoE – see Section
12.1.2.1
The device connected to an external Cable modem without authentication – see
Section
The device connected to an external Cable modem using L2TP – see Section
on page
Automatic IP address using DHCP – see Section
Manual IP address – see Section
12.1.2.1 External DSL Modem using PPPoE
The procedure below describes how to configure an Internet connection using PPPoE
when the device is connected to an external DSL modem.
To create a PPPoE connection for external DSL modem:
1.
In the 'Network Connections' screen, click the New
screen appears.
2.
Select the Internet Connection option, and then click Next; the 'Internet Connection'
screen appears.
3.
From the 'Underlying Device' drop-down menu, select the Underling Device, and then
click Next.
4.
Select the External DSL Modem option, and then click Next; the 'Point-To-Point
Protocol over Ethernet (PPPoE)' screen appears.
Figure 12-19: Point-to-Point Protocol over Ethernet (PPPoE) Screen
5.
Enter the login PPPoE username and password.
6.
Click Next; the screen 'Connection Summary' opens.
Version 4.4.0
on page
165
12.1.2.2
on page
166
169
Figure 12-18: Internet Connection
12.1.2.4
12.1.2.5
on page
174
165
12. Network Connections
12.1.2.3
on page
172
icon; the 'Connection Wizard'
MP26x/MP27x
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
