Device Rear-Panel Port Description; Table 3-4: Rear-Panel Ports Description (E.g., Mp-264-Db) - AudioCodes MP-26 series User Manual

User's Manual
3.1.2.1

Device Rear-Panel Port Description

The ports of the rear panel are described in the table below:

Table 3-4: Rear-Panel Ports Description (e.g., MP-264-DB)

Item Label
1 xDSL
2 LAN
3 LAN/WAN
4 Phone
5
USB
6 Power
7 On/Off
8 Battery Backup
9 USB1
10 Reset
3
The MP-264-DB model provides two USB ports in this location.
Version 4.4.0
RJ-11 port for connecting xDSL/xDSL2+ modem (up to 24 Mbps)
3 x RJ-45 10/100/1000 Base-T Ethernet LAN ports
1 x RJ-45 10/100/1000 Base-T Ethernet LAN or Ethernet WAN port
2 x RJ-11 FXS ports for connecting analog phones and fax machines
3
USB Type A port for print or file servers, or for optional WAN backup
2 F using a 3G USB dongle
Note: The device provides only one USB port in this location.
Power plug for connecting the supplied AC/DC power adapter. A
button is located above this port to switch on the device.
On/Off button
Port for connecting an optional battery backup, providing up to four
hours standby power. (The external battery backup system connects
to this port and the Power plug using a splitter cable.)
USB port (located on the side panel, as shown in
Reset pin button for resetting the device
Description
35
3. Hardware Description
Figure 3-3)
MP26x/MP27x