8.1.3.4
PPTP
The procedure below describes how to connect to the Internet by PPTP.
To configure PPTP connection:
1.
Under the WAN Ethernet group, from the 'Connection Type' drop-down list, select
'Point-to-Point Tunneling Protocol (PPTP)'.
2.
Configure the following (provided by your ITSP):
•
PPTP Server Host Name or IP Address
•
Login user name
•
Login password
3.
From the 'Internet Protocol' drop-down lists, select the method for assigning an IP
address (provided by your ITSP).
User's Manual
Figure 8-14: PPTP WAN Ethernet Connection
82
MP-26x/MP-27x Multimedia Home Gateway
Document #: LTRT-23510