Table 9-1: Signaling Protocol Tab Parameters Description - AudioCodes MP-26 series User Manual

User's Manual
2. Configure the parameters, as required. For a description of the parameters displayed
on this screen, see
3. Click OK to save your settings.

Table 9-1: Signaling Protocol Tab Parameters Description

Parameter
Signaling Protocol Group
Signaling Protocol
SIP Transport Protocol
Local SIP Port
Local SIP TLS Port
Gateway Name - User
Domain
Enable PRACK
Include ptime in SDP
Enable Advanced DNS
Advanced DNS Type
Enable rport
Connect media on 180
Enable Keep Alive
Version 4.4.0
Table 9-1.
(Read-only field.) Displays the signaling protocol running on the
device.
Note: Currently, only SIP is supported.
Defines the SIP transport type - UDP (default), TCP, or TLS.
Note: This parameter appears only in 'Advanced' mode.
Defines the UDP / TCP port on which the SIP stack listens. The
default port is 5060.
Note: This parameter appears only in 'Advanced' mode.
Defines the TLS port on which the SIP stack listens. The default port
is 5060.
Note: This parameter appears only if you select 'TLS' as the SIP
transport protocol.
Defines the device's domain name which is sent in the SIP From
header of outgoing INVITE messages.
Note: This parameter appears only in 'Advanced' mode.
When enabled, the device replies with a PRACK message upon
receipt of a reliable provisional response. The device does not initiate
reliable provisional responses.
Note: This parameter appears only in 'Advanced' mode.
When enabled, the device adds the ptime field to the SDP message
body.
Note: This parameter appears only in 'Advanced' mode.
Currently, this parameter is not supported.
Currently, this parameter is not supported.
Note: This parameter is available only if the 'Enable Advanced DNS'
check box is selected.
When enabled, the device adds the rport parameter to the relevant
SIP message fields.
Note: This parameter appears only in 'Advanced' mode.
When enabled, media is connected upon receipt of SIP 180, 183, or
200 messages. When this parameter is disabled, media is connected
upon receipt of 183 and 200 messages only.
Note: This parameter appears only in 'Advanced' mode.
When enabled, a keep-alive notification is sent every user-defined
interval to the SIP registrar server.
Note: This parameter appears only in 'Advanced' mode.
91
9. Configuring VoIP Parameters
Description
MP26x/MP27x