Automatic Ip Address Ethernet Connection; Pppoe; Figure 8-12: Automatic Ip Address Wan Ethernet Connection; Figure 8-13: Pppoe Wan Ethernet Connection - AudioCodes MP-26 series User Manual

User's Manual
8.1.3.2

Automatic IP Address Ethernet Connection

The procedure below describes how to connect to the Internet by automatically obtaining a
WAN IP address and DNS IP address from a DHCP server on the WAN. This method is
the default connection type.

To configure automatic IP address connection:

Under the WAN Ethernet group, from the 'Connection Type' drop-down list, select
'Automatic IP Address Ethernet Connection'.

Figure 8-12: Automatic IP Address WAN Ethernet Connection

8.1.3.3

PPPoE

The procedure below describes how to connect to the Internet by PPPoE

To configure PPPoE connection:
1. Under the WAN Ethernet group, from the 'Connection Type' drop-down list, select
'Point-to-Point Protocol over Ethernet (PPPoE)'.
2. Configure the PPPoE login username and password (provided by your ITSP).
Version 4.4.0

Figure 8-13: PPPoE WAN Ethernet Connection

81
8. Setting up your Device
MP26x/MP27x