Auto Connecting A Mobile Device; Figure 9-27: Unpairing Device Screen; Figure 9-28: Auto Connect Screen - AudioCodes MP-26 series User Manual

2. Under the Devices group, click the Remove icon
device that you wish to unpair, as shown in the figure below.
3. Follow the instructions on your mobile device.

9.10.3 Auto Connecting a Mobile Device

Auto Connect allows a mobile device to be automatically connected by the device when it
is in range.
When your mobile device connects to the device via Bluetooth the first time, it remembers
the mobile device. When you turn on your mobile device and bring it within range of the
device, it will be automatically connected by the device (if no other device is already
connected).

To Auto Connect mobile device:

On the Web interface, select the 'Auto Connect' check box; the paired mobile phone
name appears under the Devices group, as shown in the figure below.
Note: To disable Auto Connect, clear the 'Auto Connect' check box under the
Devices group.
User's Manual

Figure 9-27: Unpairing Device Screen

Figure 9-28: Auto Connect Screen

126
MP-26x/MP-27x Multimedia Home Gateway
corresponding to the mobile
Document #: LTRT-23510