Configuring The Fax/Modem/Cid Settings; Configuring The Rtp/Rtcp Settings; Figure 3-43: Fax/Modem/Cid Settings Page - AudioCodes MP-124 User Manual

3.3.2.2

Configuring the Fax/Modem/CID Settings

The 'Fax/Modem/CID Settings' page is used for configuring fax, modem, and Caller ID
(CID) parameters. For a detailed description of the parameters appearing on this page,
refer to "Configuration Parameters Reference" on page 213.
To configure the fax, modem, and CID parameters:
1. Open the 'Fax/Modem/CID Settings' page (Configuration tab > Media Settings menu
> Fax/Modem/CID Settings page item).
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 167.
3.3.2.3

Configuring the RTP/RTCP Settings

The 'RTP/RTCP Settings' page allows you to configure the Real-Time Transport Protocol
(RTP) and Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed
description of the parameters appearing on this page, refer to "Configuration Parameters
Reference" on page 213.
SIP User's Manual

Figure 3-43: Fax/Modem/CID Settings Page

70
MP-11x & MP-124
Document #: LTRT-65412