Configuring The Fax / Modem / Cid Settings; Figure 3-43: Fax/Modem/Cid Settings Page; Table 3-14: Media Settings -- Fax/Modem/Cid Parameters - AudioCodes MediaPack MP-124 User Manual

3.4.2.2

Configuring the Fax / Modem / CID Settings

The 'Fax/Modem/CID Settings' page is used for configuring fax, modem, and Caller ID
(CID) parameters.
To configure the fax, modem, and CID parameters, take these 4
steps:
1. Open the 'Fax/Modem/CID Settings' page (Configuration tab > Media Settings menu
> Fax/Modem/CID Settings page item).
2. Configure the fax, Modem, and CID parameters according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 207.

Table 3-14: Media Settings -- Fax/Modem/CID Parameters

Parameter
Fax Transport Mode
[FaxTransportMode]
SIP User's Manual

Figure 3-43: Fax/Modem/CID Settings Page

Fax transport mode used by the device.
[0] Disable = transparent mode.
[1] T.38 Relay = (default).
[2] Bypass.
[3] Events Only.
Note: If parameter IsFaxUsed = 1, then FaxTransportMode is
always set to 1 (T.38 relay).
70
MediaPack Series
Description
Document #: LTRT-65410