A.3
Configuring Fax and Modem
This section describes the configuration setup for Fax (refer to Section
Transfer over
over
IP' on page 167) over IP.
A.3.1
Configuring Fax Transfer over IP
The following example demonstrates a FAX setup between two MediaPack gateways. This
scenario is similar to the initial settings, except that in this example the MediaPack is
connected to a PBX and the FAX machine is connected to the PBX.
Refer to the initial settings in Section
parameters configuration. For connecting the PBX to the MediaPack, refer to Section
'Connecting the MediaPack to a
User's Manual
IP' on page 164) and modem (refer to Section
PBX' on page 155.
Figure A-6: Fax Transfer over IP Example Setup
'Initial
Configuration' on page
164
MediaPack BRI Series
'Configuring Fax
'Configuring Modem Transfer
39
for the basic
Document #: LTRT-83702