The Roll Is Empty; Sheet Printing Is Selected - Canon imagePROGRAF iPF8000S User Manual

Messages regarding paper

The roll is empty.

There is no more paper left on the roll.
No sheets.
A sheet has not been loaded.
Or, paper was removed during feeding.

Sheet printing is selected.

You have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.
788 Error Message
Cause
Cause
Cause
Corrective Action
Follow the steps below to replace the used roll with a
new roll of the same type and size.
1.
Remove the roll.
(→P.128)
(→P.129)
(→P.130)
2.
Load the new roll.
(→P.120)
(→P.121)
3.
If no barcode was printed on the roll, specify the
paper type.
(→P.125)
4.
If no barcode was printed on the roll, specify the
paper length.
(→P.126)
Corrective Action
Load paper of the type and size you have specied
in the printer driver.
(→P.148)
Hold down the Stop button for a second or more to
cancel printing.
Corrective Action
Load a sheet and try printing again.
To print on a roll instead, hold the Stop button for
more than a second to cancel printing, load a roll,
and then print.
(→P.85)