Canon imagePROGRAF iPF8000S User Manual page 481
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Selecting Color Tones on Charts Before Printing
(Windows)
Print Charts, note the number of the chart with your desired color tone, and enter this number in the printer
driver before printing.
Important
•
This function requires that the Light Source Check Tool be installed.
•
You can install the Light Source Check Tool from the User Software CD-ROM.
1.
Choose Print in the application menu.
2.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.482)
3.
Make sure the Main sheet is displayed.
4.
A
In the
Media Type list, select the type of paper that is loaded (for example, Glossy Photo
Paper).
Important
•
Ambient light matching may not be available, depending on the type of paper used. For more
information, see the Paper Reference Guide. (→P.109)
Other useful settings
Enhanced Printing Options 465
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated