Handling Rolls; Loading Rolls On The Roll Holder - Canon imagePROGRAF iPF8000S User Manual

Handling rolls

Loading Rolls on the Roll Holder

When printing on rolls, attach the Roll Holder to the roll.
Important
•
Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding
problems and affect the printing quality. Be careful not to cut through any barcodes printed on the roll.
•
Wind up the roll so that the edge is even across the roll. This may cause feeding problems.
Caution
•
Set the roll on a table or other at surface so that it does not roll or fall. Rolls are heavy, and dropping a
roll may cause injury.
Note
•
Printed rolls will not work correctly. Cut away the printed portion before loading the roll.
•
For details on supported sizes and types of rolls, see "Paper Sizes" or the Paper Reference Guide.
(→P.114) (→P.109)
•
After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load
the paper.
Handling rolls
Handling Paper 117