Media take-up unit
13.
On the Right Media Take-up Unit, pull the Rewind Mode Switch forward to turn it on. Press
▼ to rewind the roll so that it is nearly taut.
Important
•
Rewind the paper so that the paper core makes at least two revolutions. If the paper is not rewound
two full revolutions, repeat steps 11 and 12.
•
Do not manually force the Rewind Spool or paper core to rotate them. This may damage them. To
rewind or unwind rolls, press ▲ or ▼ on the Media Take-up Unit.
14.
You can unwind rolls by holding down ▼ on the Control Panel.
15.
Use a combination of Weight Roll, Weight Joint, and Weight Flange that matches the roll type
and width.
170 Handling Paper