Pr�Nt�Ng At Full S�Ze (Mac Os 9) - Canon imagePROGRAF iPF8000S User Manual
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Printing at full size
Printing at Full Size (Mac OS 9)
This topic describes how to print at full size based on the following example. (Oversized Printing)
•
Document: Any type
•
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
•
Paper: Roll
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1.
Select the printer in Chooser.
2.
Choose Page Setup from the application menu to display the Page Attribute dialog box.
3.
D
In
Print Area Setting, click
4.
A
In the
Page Size list, click the size of the original. In this case, click ISO A4.
5.
I
Click
OK to close the dialog box.
6.
Choose Print in the application menu.
7.
Make sure the Main pane is displayed.
8.
C
In the
Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
9.
Select the printing application in the
310 Enhanced Printing Options
G
For printing oversizes.
F
Print Target list.
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated