Canon imagePROGRAF iPF8000S User Manual page 769

Hide thumbs Also See for imagePROGRAF iPF8000S:
Table of Contents

Advertisement

Troubleshooting
Frequently Asked Questions
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the
hyperlinks in the answer column.
Question
How do I print on a roll?
How do I print manually?
How do I switch between
printing on a roll and printing
manually?
How do I change the paper
type or size?
How do I cut the roll paper after
printing?
How do I print without borders? Borderless printing is possible on rolls. You can also specify borderless
How do I print an A4 original
enlarged on A2 paper?
When printing on rolls, after loading the roll, specify the paper type and
length, both on the Control Panel and in the printer driver.
ÞLoading and Printing on Rolls (→P.85)
When printing manually, specify the paper type and size in the printer
driver, and then load the paper.
ÞLoading and Printing on Sheets (→P.89)
Press the Feeder Selection button to switch the paper source between
the roll and a sheet.
ÞSelecting the Paper Source (→P.124)
Specify the type and size of paper, both on the Control Panel and in the
printer driver.
Specifying it in the Printer Driver
ÞSpecifying Paper in the Printer Driver (→P.264)
Specifying it on the Control Panel
Selecting the paper type
ÞSelecting the Paper Type (Roll) (→P.125)
ÞSelecting the Paper Type (Sheet) (→P.147)
Selecting the Paper Size
ÞSpecifying the Paper Length (Roll) (→P.126)
You can wait until ink dries before cutting the roll, and you can cut rolls
at a desired position.
ÞSpecifying the Cutting Method for Rolls (→P.139)
printing in the printer driver by adjusting the original size to match the
paper size.
Borderless printing is not supported on sheets.
ÞBorderless Printing on Paper of Equivalent Size (→P.322)
ÞBorderless Printing by Resizing Originals to Fit the Roll Width (→P.332)
ÞBorderless Printing at Actual Size (→P.312)
In the printer driver, you can adjust the original image to match the paper
size or width, or you can specify enlargement or reduction before printing
as desired.
ÞResizing Originals to Match the Paper Size (→P.270)
ÞResizing Originals to Fit the Roll Width (→P.279)
ÞResizing Originals by Entering a Scaling Value (→P.288)
Frequently Asked Questions
Answer
Troubleshooting 753

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents