Canon imagePROGRAF iPF8000S User Manual page 578
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Printer Driver
Finishing Pane (Mac OS 9)
The following settings are available on the Finishing pane. For details on settings items, refer to the printer
driver help.
Setting Item
A
Media Source
B
Roll Paper Width
C
Watermark
D
Watermarks
E
Edit Watermark
F
Print Centered
G
Rotate 180 degrees
H
No Spaces at Top or Bottom Activate this setting to print the next image skipping blank areas above
I
Rotate Page 90 degrees
562 Mac OS 9 Software
You can choose the media source.
Options displayed in the list vary depending on the selection in
Type in the Main pane.
Displays the paper width of the roll loaded in the printer. Unknown is
displayed if the printer cannot detect the roll paper width.
Activating this option makes two settings available,
E
Edit Watermark.
Printing With Watermarks (→P.438)
Lists the provided watermarks. Choose the watermark to print.
Click to display the Edit Watermark dialog box for creating your own,
original watermark.
Choose this option to print the document images in the center of the
paper.
Printing Originals Centered on Rolls (→P.400)
Printing Originals Centered on Sheets (→P.409)
Activate this setting to rotate the document image by 180 degrees before
printing.
and below printable data in documents, which enables you to conserve
the paper.
Conserving Roll Paper by Printing Originals Without Top and Bottom
Margins (→P.425)
Activate this setting to rotate the document image by 90 degrees before
printing.
Conserving Roll Paper by Rotating Originals 90 Degrees (→P.417)
Description
D
C
Media
Watermarks and
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated