Canon imagePROGRAF iPF8000S User Manual page 374
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Printing banners or at other non-standard sizes
8.
Click OK to close the Custom Page Sizes dialog box.
9.
C
In the
Paper Size list, click the size of the original. In this case, click "100*500", the size
you registered.
10.
D
In
Orientation, click the icon of the document in landscape orientation.
11.
F
Click
OK to close the dialog box.
Printing the banner
Follow the steps below to print the banner using the corresponding banner settings.
1.
Choose Print in the application menu.
2.
Access the Main pane.
3.
A
In the
Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
4.
After conrming that
E
Print Target list.
5.
Access the Page Setup pane.
358 Enhanced Printing Options
D
Easy Settings is selected, click Poster (Text, Illustrations) in the
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated