Detection Of The Remaining Roll Paper - Canon imagePROGRAF iPF8000S User Manual

Detection of the Remaining Roll Paper

If you have activated automatic detection of the remaining roll paper, when the roll is ejected, a barcode with text is
printed on the roll paper that identies the type of paper and amount left. If this function is activated and barcodes
are printed on the roll paper, the type of paper and amount left are automatically detected when you load a
roll. The barcode will be cut off after it has been read.
Note
•
Only the text message is printed if the document is not cut but kept in the printer, or if you are printing on
clear lm.
Important
•
If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel.
Follow these steps to activate detection of the remaining roll paper.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Media Menu, and then press the ► button.
3.
Press ▲ or ▼ to select Chk Remain.Roll, and then press the ► button.
4.
Press ▲ or ▼ to select the desired setting option, and then press the OK button.
Handling rolls
Handling Paper 135