Canon imagePROGRAF iPF8000S User Manual page 519
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Paper Size Options Dialog Box (Windows)
In the Paper Size Options dialog box, you can create and register your own Custom Paper Size. The sizes
you dene are listed with standard paper sizes for selection later as needed.
Note
•
To display the Paper Size Options dialog box, on the Page Setup sheet, click Paper Size Options.
(→P.501)
Setting Item
A
Paper Size List
B
Delete
C
Custom Paper Size Name
D
Units
E
Paper Size
F
Add
G
Display Series
Shows the names and sizes of paper that can be used with the printer
driver.
Custom paper sizes created by users can be deleted from the Paper Size
List, as needed.
However, they cannot be deleted in the following situations.
•
If a standard paper size of the printer driver is selected.
•
If an oversized paper size is selected.
•
If a paper size in a red box is selected.
You can name Custom Paper Size as desired.
Specify the desired unit of measure for the Custom Paper Size height
and width.
Specify the desired Width and Height. You can make your selection
from sizes that are compatible with Borderless Printing by selecting
Borderless Printing Size. To maintain the aspect ratio of the Width and
Height as you resize the paper, select Fix the Ratio of the Width to
Height.
Enables you to register the custom paper size you have specied or
overwrite an existing custom paper size.
You can limit the number of options shown in Page Size, Paper Size, and
Paper Size List.
Description
Printer Driver
Windows Software 503
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated