Canon imagePROGRAF iPF8000S User Manual page 713
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
5.
D
Click
Advanced Settings to switch the print mode.
6.
F
In
Print Quality, click Highest or High.
Important
•
Ambient Light Matching mode is only available when the
7.
Click Color in the
8.
H
Click
Color Settings to display the Color Settings dialog box.
9.
Click the Matching tab to display the Matching sheet.
10.
Click Ambient Light Matching Mode (Kyuanos) in the
11.
Conrm that By selecting a chart number is selected in
If it is not selected already, select it.
G
Color Mode list.
F
Print Quality is set to Highest or High.
A
Matching Mode list.
C
Setting Method.
Adjustments for Better Print Quality 697
Color adjustment
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated