Pr�Nt�Ng Photos �N Monochrome (W�Ndows) - Canon imagePROGRAF iPF8000S User Manual
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Printing Photos in Monochrome (Windows)
This topic describes how to print photos in monochrome based on the following example.
•
Original: Photo image from a digital camera
•
Page size: 10×12 inches
•
Paper: Roll
•
Paper type: Glossy Photo Paper
•
Roll paper width: 10 inches (254.0 mm)
1.
Choose Print in the application menu.
2.
Select the printer in the dialog box, and then display the printer driver dialog box. (→P.482)
3.
Make sure the Main sheet is displayed.
4.
A
In the
Media Type list, select the type of paper that is loaded. In this case, click Glossy
Photo Paper.
A
In the
Media Type setting, choose the type of paper for printing, such as Glossy Paper,
Coated Paper, and so on. Make sure the paper you select is loaded in the printer.
Note
•
The paper type setting in the printer driver and related software (as well as on the Control Panel) is
updated when you install the Media Conguration Tool from the User Software CD-ROM or if you
change paper information by using the Media Conguration Tool. (See the Media Conguration Tool
Guide (Windows) or Media Conguration Tool Guide (Macintosh).)
5.
After conrming that
Target list.
Caution
•
Photo (Monochrome) may not be available for all types of paper.
Note
•
You can check the settings values selected in the
D
Easy Settings is selected, click Photo (Monochrome) in the
E
Print Target list by clicking
Working With Various Print Jobs 189
Printing Photos and Images
E
Print
F
View Settings.
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated