Other useful settings
8.
After conrming that
Target list.
Note
•
You can check the settings values selected in the
9.
Access the Finishing pane.
10.
Click Roll Paper in the
11.
Make sure the width of the loaded roll is displayed in the
ISO A2/A3 (420.0mm).
Note
•
If the width of the loaded roll is not displayed in
pane and update the printer information.
12.
Select the
442 Enhanced Printing Options
E
Easy Settings is selected, click CAD (Line Drawing) in the
A
Media Source list.
C
Watermark check box.
F
Print Target list by clicking
B
Roll Paper Width list-in this case,
B
Roll Paper Width, click
F
Print
G
View set..
L
Printer on the Main