Canon imagePROGRAF iPF8000S User Manual page 540
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Printer Driver
8.
Access the Page Setup pane.
9.
A
In the
Paper Source list, select how paper is supplied.
10.
If you have selected Cut Sheet or Manual in
Page Setup is displayed in
make sure the width of the loaded roll is displayed in
Note
•
If the width of the roll loaded in the printer is not shown in
on the Main pane to update the printer information.
Note
•
A variety of settings are available in the printer driver to suit different printing applications.
For details on available printing conditions, see "Printer Driver Settings (Mac OS X)". (→P.522)
524 Mac OS X Software
A
Paper Source, make sure the size as selected in
C
Page Size. If you have selected Roll Paper in
B
Roll Width.
B
Roll Width, click
A
Paper Source,
L
Printer Information
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated