Deleting Saved Jobs - Canon imagePROGRAF iPF8000S User Manual
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Basic Print Job Operations
Deleting Saved Jobs
You can delete saved jobs in the box shared among all users and in each personal box.
Delete stored print jobs as follows.
•
Using the Control Panel
•
Using RemoteUI
•
Using imagePROGRAF Status Monitor (Windows)
•
Using imagePROGRAF Printmonitor (Mac OS)
Using the Control Panel
1.
Press the Menu button to display MAIN MENU.
2.
Delete the saved job.
•
To delete saved jobs in the Common Box
1.
Press ▲ or ▼ to select Job Management, and then press the ► button.
2.
Press ▲ or ▼ to select Com. BOX Ope., and then press the ► button.
3.
Press ▲ or ▼ to select Job List, and then press the ► button.
4.
Press ▲ or ▼ to select the saved job to delete, and then press the ► button.
5.
Press ▲ or ▼ to select Delete, and then press the ► button.
6.
Conrm the print job for deletion and press the OK button.
•
To delete saved jobs in Personal Boxes
1.
Press ▲ or ▼ to select Job Management, and then press the ► button.
2.
Press ▲ or ▼ to select Psnl. BOX Ope., and then press the ► button.
3.
Press ▲ or ▼ to select the folder, and then press the ► button.
4.
Enter a password if one has been set, and then press the OK button.
5.
Press ▲ or ▼ to select Job List, and then press the ► button.
6.
Press ▲ or ▼ to select the saved job to delete, and then press the ► button.
7.
Press ▲ or ▼ to select Delete, and then press the ► button.
8.
Conrm the print job for deletion and press the OK button.
640 Print Jobs
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated