Canon imagePROGRAF iPF8000S User Manual page 66

Control Panel
First Level
*1: Available only if a roll is loaded.
*2: Available only if Chk Remain.Roll is On.
*3: Available if Feed Priority is Automatic or Print Length.
*4: Not displayed if IP Mode is Manual.
*5: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.109) The paper type setting in the printer driver and related software (as well as on the Control
Panel) is updated when you install the printer driver from the User Software CD-ROM or if you change
paper information by using the Media Conguration Tool.See the Media Conguration Tool Guide
(Windows) or Media Conguration Tool Guide (Macintosh).
*6: Not displayed if NetWare is Off.
*7: Not displayed if Auto Detect is On.
*8: Follows the setting in Date Format.
*9: Displayed if the Media Take-up Unit is attached.
*10: Available after you have used Advanced Adj. in Auto Head Adj. once.
*11: Available if: (a) Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed
Auto Feed for the loaded roll.
*12: Not displayed if IP Mode is Automatic.
*13: Follows the setting in Length Unit.
Caution
•
Only the following menus are displayed during printing.
•
Menu Durng Prtng
Choose this menu to display Head Cleaning, Fine Band Adj., and Information.
•
Job Mgmt Menu
Choose this menu to display Job Queue Ope., Com. BOX Ope., and Psnl. BOX Ope..
50 Printer Parts
Second Level
Job Log (Choose from
information about
the latest three print
jobs.)
HDD Information HDDSpace
Third Level Fourth Level
Document Name
User Name
Page Count
Job Status
Print Start Time
Print End Time
Print Time
Print Size
Media Type
Interface
Ink Consumed
Fifth Level