Canon imagePROGRAF iPF8000S User Manual page 590
Hide thumbs
Also See for imagePROGRAF iPF8000S:
- Service manual (334 pages) ,
- Questions and answers (36 pages) ,
- Brochure (8 pages)
Table of Contents
Advertisement
Printer Driver
Printing Adobe RGB Images (Mac OS 9)
This topic describes how to print Adobe RGB images based on the following example.
•
Document: Adobe RGB image created in Photoshop
•
Page size: 10×12 inches (254.0×304.8 mm)
•
Paper: Roll
•
Paper type: Glossy Photo Paper
•
Roll width: 10 inches (254.0 mm)
Important
•
Do not set up color-matching in Photoshop.
•
In the printer driver, specify Driver Matching Mode and set Color Space to Adobe RGB.
1.
In Photoshop, create an image in the Adobe RGB color space.
Note
•
Photoshop CS2 is used in this example.
•
For instructions on creating Adobe RGB images, refer to the Photoshop documentation.
2.
In the Photoshop menu, choose Print.
3.
Make sure the Main pane is displayed.
4.
C
In the
Media Type list, select the type of paper that is loaded. In this case, click Glossy
Photo Paper.
574 Mac OS 9 Software
- Quick Links:
- Print Area
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the imagePROGRAF iPF8000S and is the answer not in the manual?
Questions and answers
how so you get to initialize on canon program Ipf8000s
To initialize the Canon imagePROGRAF iPF8000S, you can configure its IP address using the imagePROGRAF Device Setup Utility by following these steps:
1. Start the imagePROGRAF Device Setup Utility from the Start menu.
2. Select the printer from the Device Name list.
3. Choose "Protocol Settings" from the Printer menu.
4. In the "Setting IP Address" list, select "Manual".
5. Enter the assigned IP address and click the "Set" button.
6. Click "OK" when the confirmation message appears.
7. Exit the utility.
Alternatively, to configure the IP address automatically, choose "Auto" and select DHCP, BOOTP, or RARP. You can also set the subnet mask and default gateway.
This answer is automatically generated